cars driving on urban highway in evening

NSX Advanced Load Balancer (ALB) – Part 1 – Basic Virtual Service – Initial Setup, Prerequisites and Creating an NSX-T Cloud

Reading Time: 6 minutes

VMware NSX has offered load-balancing capabilities since its inception as VMware NSX for vSphere v6.0 way back in October 2013. Since then, the technology was superseded by VMware NSX-T 1.0 in May 2016 (later rebranded to VMware NSX-T Data Center (v2.2) and again to VMware NSX (v4.x)), thanks to VMware’s $1.26B acquisition of Nicira in 2012. VMware NSX-T brought us (and still does) truly hypervisor-agnostic networking, security, and native load-balancing capabilities.

In 2019, VMware acquired Avi Networks, leaders in software-defined application delivery services for the multi-cloud era. Furthermore, the VMware NSX Advanced Load Balancer (v18.2) was announced in November 2019 following this acquisition.

So, what about the NSX native load balancer? VMware will deprecate this feature in an upcoming release of VMware NSX (likely 5.x), but see below update for more information), however, no date has yet been released. However, VMware advises that customers take appropriate steps to migrate to the NSX Advanced Load Balancer (for which there is a free tier with appropriate VMware NSX licensing) as soon as possible.

Continue reading → NSX Advanced Load Balancer (ALB) – Part 1 – Basic Virtual Service – Initial Setup, Prerequisites and Creating an NSX-T Cloud

VMware Certified Advanced Professional – Network Virtualization Design 2022 (VCAP-NV Design 3V0-42.20)

Reading Time: 6 minutes

In this first article of a two-part series, I cover a few of my thoughts and experiences which helped me to pass the VCAP-NV Design Exam. Back in 2022, I began the journey towards the VMware Certified Implementation Expert – Network Virtualization 2023 milestone, the prerequisites for which were the completion of both the VCAP-NV Design and VCAP-NV Deploy accreditations. Last month (July 2023), I passed the second prerequisite exam resulting in the VMware Certified Implementation Expert – Network Virtualization 2023 milestone.

I chose to sit the VCAP-NV Design first. As a Technical Architect, my daily activities focus primarily on discovery, design and architectural governance, but I’m still pretty close to the coal face when it comes to hands-on. There is no requirement here; you can sit whichever exam you want first.

The VCAP-NV Design requires a good understanding of VMware NSX, its configuration maximums and requirements, and a good grasp on the architecture elements (e.g., physical, conceptual and logical design, and requirements, constraints, assumptions and risks).

Continue reading → VMware Certified Advanced Professional – Network Virtualization Design 2022 (VCAP-NV Design 3V0-42.20)

London VMUG - LonVMUG

London VMUG – 13th July 2023

Reading Time: 4 minutes

Ask anyone. They’ll tell you the same, ‘That Gareth chap loves a VMUG event!’ They’d be correct too.

I’ve been a member of the VMware User Group for some time now, a group of technologists eager to share their thoughts and passion for VMware products. However, the vCommunity (as we put it) can also help as a sounding board for your technical issues, etc., so what better way to meet up with like-minded individuals than at these fantastic VMUG events? A fantastic day catching up with fellow VMUG members as well as a few fellow vExperts and vExpertPROs!

Continue reading → London VMUG – 13th July 2023

wood dirty writing abstract

VMware NSX for vSphere to NSX-T Migration – End-to-End User Defined Topology – Config Translation Failed – Reason: Topology Plugin

Reading Time: 3 minutes

In a previous post focusing on the VMware NSX Migration Coordinator (VMware NSX for vSphere to NSX-T Migration – End-to-End User Defined Topology), I detailed the end-to-end process required to migrate VMware NSX Data Center for vSphere (NSX-V) to VMware NSX-T Data Center (now simply VMware NSX as of 4.x) and, more specifically, the ‘User Defined’ option, which allows customers to map NSX-V Edge Services Gateways (ESGs) and Distributed Logical Routers (DLRs) to NSX-T components (e.g., Tier-0 or Tier-1 Gateways). To perform this mapping, customers can either a) upload a pre-defined JSON file or b) use the NSX UI to select the appropriate Tier-0/Tier-1 Gateway via drop-down menus.

The previous post utilised VMware NSX Data Center for vSphere 6.4.13 and VMware NSX-T Data Center 3.2.1, however, labbing this in readiness for an upcoming customer engagement required VMware NSX Data Center for vSphere 6.4.14 and VMware NSX (formerly NSX-T) 4.0.1.1; herein lies the identification of a possible bug when using the UI to map ESGs/DLRs to Tier-0/Tier-1 Gateways.

Continue reading → VMware NSX for vSphere to NSX-T Migration – End-to-End User Defined Topology – Config Translation Failed – Reason: Topology Plugin

golden gate bridge san francisco california

Extending Overlay Segments to VLAN via the VMware NSX Edge Bridge

Reading Time: 9 minutes

I’ve worked with many customers over the years who are new to VMware NSX. This generally means a full design and deployment of NSX, but to be honest, a) that’s the easy bit and b) it doesn’t give the customer much in the way of immediate value. After all, all we’ve done is deploy a software-defined networking platform and generally peered it with the physical environment.

The value begins once the Customer’s workload is actually housed on an NSX Segment. This is where we begin discussing workload migrations from physical VLANs/VDS port groups to NSX Overlay Segments. ‘Easy’ you say, ‘just migrate the virtual machines and re-IP, right’? That’s one option, however, what if the Customer has thousands of VMs? What if these VMs host mission-critical applications or applications which are prone to issues following re-IPing? Sometimes this option just isn’t feasible.

The best solution for this Customer might be to migrate workloads and retain IP addressing. We can achieve this by migrating the entire physical network into VMware NSX, however, we can also achieve this by creating a VMware NSX Edge Bridge, which effectively creates a layer-2 extension between a physical VLAN and an NSX Overlay Segment.

In this article, we will detail a number of migration scenarios before detailing the process of deploying and configuring a layer 2 extension via NSX Edge Bridge.

Continue reading → Extending Overlay Segments to VLAN via the VMware NSX Edge Bridge

2023 VMware vExpert Applications and How to Apply

Reading Time: 3 minutes

It’s that time of year, folks! vExpert applications for 2023 opened on Monday, 12th December 2022 (closing on Friday, 13th January 2023), and with it, the excitement (horror/trepidation) of the intake process began.

The programme is dedicated to those who want to support and give back to our wonderful community of VMware advocates, home labbing enthusiasts, content creators and public speakers. For those out there (most of us) with a touch (slathering) of the old Imposter Syndrome, joining said group of VMware advocates, home labbing enthusiasts, content creators, and public speakers might feel like the scariest thing in the world, however, believe me, it shouldn’t be.

Continue reading → 2023 VMware vExpert Applications and How to Apply

photo of woman looking through camera

VMware NSX Distributed Firewall (DFW) FQDN Filtering

Reading Time: 4 minutes

I recently had a great VMware NSX discussion with a contact on Twitter. They had reached out to me wondering if there was a way of restricting a VM’s connectivity to the internet by limiting its access to a set of wildcard addresses, e.g. *.example.com. The specific ask was to restrict access to Microsoft Windows Server Update Services, as the vast list of underlying IP addresses for *update.microsoft.com, *.download.windowsupdate.com, etc., changes regularly. In this scenario, utilising wildcards within the VMware NSX DFW rules would be hugely advantageous.

FQDN filtering within VMware NSX has been available for some time and is a quick and easy task to configure, either to allow or restrict traffic. In this article, we look at the process of implementing FQDN filtering and validate post-implementation.

Continue reading → VMware NSX Distributed Firewall (DFW) FQDN Filtering

The Next Chapter of Multi-Cloud Management, with VMware Aria Hub, Powered by VMware Aria Graph

Reading Time: 3 minutes

The excitement around VMware Aria Hub powered by VMware Aria Graph has been increasing since its initial announcement back in August 2022, and this brand-new, SaaS-based, multi-cloud management solution is making a big splash.

VMware Aria has been developed from the ground up to not just align disparate products within the vRealize Suite (vROps, vRA, vRLI, vRNI, etc.), but to enable customers to consistently deploy, migrate, operate, and monitor apps, infrastructure, and platform services across private, hybrid, and multiple clouds from a single platform with a common data model.

Continue reading → The Next Chapter of Multi-Cloud Management, with VMware Aria Hub, Powered by VMware Aria Graph

UK VMUG UserCon 2022

Reading Time: 4 minutes

It’s been a few years since I was able to venture to Leicester for the UK VMUG UserCon, the national VMUG event here in the UK. After Covid laid wasted to the previous two years, there was certainly excitement from all attendees, and it was fantastic to see such a great turnout at this year’s event on Thursday, 17th November 2022.

Yes, the technical content at VMUGs is always fantastic, with customer-driven challenges/stories/fixes, complementing VMware sessions, however, the main thing I love about these events is that they give attendees the ability to catch up with members of the community and to discuss their challenges within a safe and informal forum. They are also a great way to catch up with customers, partners, and friends over a coffee.

So, after a two-year hiatus of the UK VMUG UserCon, the ‘in-person’ community is very much alive!

Continue reading → UK VMUG UserCon 2022

VMware Explore Europe 2022

Reading Time: 5 minutes

VMware Explore Europe took place once again last week (Mon 7th Nov to Thu 10th Nov) in Barcelona’s Fira Gran Via following a two-year hiatus due to Covid-19. I’ve not attended since 2018 and despite the venue being a little more compact this time around following two years of Covid and the worry that attendance would be lower than usual, not only did numbers far exceed expectations (word on the street is they mirror, if not beat, the San Francisco event), but the session content and the ability to finally meet up with customers, partners and friends within the community in person, was absolutely fantastic.

Continue reading → VMware Explore Europe 2022